ISO 3364:2011 pdf download.lndexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies,
Iso 513, CIa slflcalior, and application of hard cutting mat ei’fals fbr metal removal with defined cutting edges — Designation of the main groups and groups of application
ISO 1832, Indexable inserts for cutting tools — DesAgnation
3 Types of insert
The types of indexable hardmetal (carbide) insert specified in this International Standard are the following:
— TN: triangular Inserts, with O normal clearance:
— SN: square inserts, with 0 normal clearance;
— CN: rhombic inserts, with 0 normal clearance and 8O included angle:
— DN: rhombic inserts, with O normal clearance and 55’ included angle:
— WN: hexagonal (trigon) inserts, with O normal clearance and 8O included angle;
— VN: rhombic inserts, with 0 normal clearance and 35 included angle.
Inserts covered by this International Standard are standardized with chip breakers on both faces, with chip breakers on one face only and with no ship breakers at all.
Neither the shape nor the dimensions of chip breakers are standardized. Thus, if necessary. special features shall be explained by means of a diagram or additional specifications.
Table B.1 gives the range of sizes for these .nserts
4 Interchangeability
4.1 Tolerances
Indexable hard metal (carbide) inserts specified in this International Standard are provided in tolerance classes in accordance with ISO 1832.
Other tolerances are grven, either in Table 1 for hole dimensions, or ii Tables 2 to 7 for insert dimensions.
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies,
Iso 513, CIa slflcalior, and application of hard cutting mat ei’fals fbr metal removal with defined cutting edges — Designation of the main groups and groups of application
ISO 1832, Indexable inserts for cutting tools — DesAgnation
3 Types of insert
The types of indexable hardmetal (carbide) insert specified in this International Standard are the following:
— TN: triangular Inserts, with O normal clearance:
— SN: square inserts, with 0 normal clearance;
— CN: rhombic inserts, with 0 normal clearance and 8O included angle:
— DN: rhombic inserts, with O normal clearance and 55’ included angle:
— WN: hexagonal (trigon) inserts, with O normal clearance and 8O included angle;
— VN: rhombic inserts, with 0 normal clearance and 35 included angle.
Inserts covered by this International Standard are standardized with chip breakers on both faces, with chip breakers on one face only and with no ship breakers at all.
Neither the shape nor the dimensions of chip breakers are standardized. Thus, if necessary. special features shall be explained by means of a diagram or additional specifications.
Table B.1 gives the range of sizes for these .nserts
4 Interchangeability
4.1 Tolerances
Indexable hard metal (carbide) inserts specified in this International Standard are provided in tolerance classes in accordance with ISO 1832.
Other tolerances are grven, either in Table 1 for hole dimensions, or ii Tables 2 to 7 for insert dimensions.
