ISO 6469-3:2011 pdf download.Electrically propelled road vehicles —Safety specifications — Part 3: Protection of persons against electricshock.
ISO 6469-3 specifies tolerances for glass bottles of circular cross-section and nominal capacity from 50 ml to 5000 ml.
NOTE This International Standard is based on CE.T.I.E [Centre technique international de l’embouteillage et du conditionnement (International Technical Centre for Bottling and Packaging). 112-114. rue La Boêtie. 75008 Pans. France, http:Jlwwwcetie,orgj data sheet DT 2 (1996) and EC Council Directive 75/107/EEC,
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 7348:1992, Glass containers — Manufacture — Vocabulary
ISO 9009:1991. Glass containers — Height and non-parallelism of finish with reference to container base — Test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 7348 and ISO 9009 and the following apply.
leading body diameter
greatest horizontal cross-sectional dimension of a container
4 Tolerances
4.1 Capacity tolerance
The actual capacity error (tolerance) shall be in accordance with the values specified in Table 1.
NOTE This International Standard is based on CE.T.I.E [Centre technique international de l’embouteillage et du conditionnement (International Technical Centre for Bottling and Packaging). 112-114. rue La Boêtie. 75008 Pans. France, http:Jlwwwcetie,orgj data sheet DT 2 (1996) and EC Council Directive 75/107/EEC,
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 7348:1992, Glass containers — Manufacture — Vocabulary
ISO 9009:1991. Glass containers — Height and non-parallelism of finish with reference to container base — Test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 7348 and ISO 9009 and the following apply.
leading body diameter
greatest horizontal cross-sectional dimension of a container
4 Tolerances
4.1 Capacity tolerance
The actual capacity error (tolerance) shall be in accordance with the values specified in Table 1.
