ISO 14373:2006 pdf download.Resistance welding -Procedure for spot welding of uncoated and coated low carbon steels.
2 Normative references
The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 669, Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
ISO 5182, Welding — Materials for resistance welding electrodes and ancillary equipment
ISO 10447, Welding— Peel and chisel testing of resistance spot. projection and seam welds
ISO 14270, Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
ISO 14329, Resistance welding — Destructive tests of welds — Failure types and geometnc measurements for resistance spot, seam and projection welds
ISO 15609-5. SpecIfication and qualIt)cat,on of welding procedures for metallic materials— Welding procedure specification — Part 5: Resistance welding
ISO 15614-12, Specification and qualification of welding procedures for metaHic materials — Welding procedure test — Part 12: Spot, seam and projection welding
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 669, ISO 14329, and the following apply.
3.1
corona bond zone
area of the weld at the faying surfaces in which sohd phase bonding has occurred
See Figure 2.
3.2
cross-tension test
test to determine the load-carrying capability of a spot welded joint subjected to cross tension loading
3.3
shear test
tensile shear test
test to determine the load-carrying capability of a spot welded joint subjected to shear tension loading
3.4
weld nugget
Ienhcular zone in a resistance weld, where metal from both (all) sheets has melted and re-solidified
weld pitch
centre-to-centre distance between adjacent spot welds.
The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 669, Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
ISO 5182, Welding — Materials for resistance welding electrodes and ancillary equipment
ISO 10447, Welding— Peel and chisel testing of resistance spot. projection and seam welds
ISO 14270, Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
ISO 14329, Resistance welding — Destructive tests of welds — Failure types and geometnc measurements for resistance spot, seam and projection welds
ISO 15609-5. SpecIfication and qualIt)cat,on of welding procedures for metallic materials— Welding procedure specification — Part 5: Resistance welding
ISO 15614-12, Specification and qualification of welding procedures for metaHic materials — Welding procedure test — Part 12: Spot, seam and projection welding
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 669, ISO 14329, and the following apply.
3.1
corona bond zone
area of the weld at the faying surfaces in which sohd phase bonding has occurred
See Figure 2.
3.2
cross-tension test
test to determine the load-carrying capability of a spot welded joint subjected to cross tension loading
3.3
shear test
tensile shear test
test to determine the load-carrying capability of a spot welded joint subjected to shear tension loading
3.4
weld nugget
Ienhcular zone in a resistance weld, where metal from both (all) sheets has melted and re-solidified
weld pitch
centre-to-centre distance between adjacent spot welds.
