ISO 7148-1:2012 pdf download.Plain bearings —Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals.
This part of ISO 7148 specifies tribological tests of metallic bearing materials for plain bearings under conditions of boundary lubrication.
The test procedures described in this part of ISO 7148 enable the friction and wear behaviour of bearing material/mating/lubricant combinations to be compared with that of other combinations. thus facilitating the selection of a bearing material for running repeatedly or for long periods under conditions of boundary lubrication, low speed and continuous sliding. Owing to differences in test conditions, measured friction and wear values can be expected to vary from one test facility to another.
The test results give useful information for practical application only If all parameters of Influence are identical. The more the test conditions deviate from the actual application, the greater the uncertainty of the applicability of the results.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 4385, Plain bearings — Comprecsion testing of metallic bearing materials
3 Symbols and units
See Table 1.
The test procedures described in this part of ISO 7148 enable the friction and wear behaviour of bearing material/mating/lubricant combinations to be compared with that of other combinations. thus facilitating the selection of a bearing material for running repeatedly or for long periods under conditions of boundary lubrication, low speed and continuous sliding. Owing to differences in test conditions, measured friction and wear values can be expected to vary from one test facility to another.
The test results give useful information for practical application only If all parameters of Influence are identical. The more the test conditions deviate from the actual application, the greater the uncertainty of the applicability of the results.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 4385, Plain bearings — Comprecsion testing of metallic bearing materials
3 Symbols and units
See Table 1.
