ISO 6462:2011 pdf download.Face and shoulder milling cutters within dexable inserts - Dimensions.
2 Normative references
The following referenced documents are Indispensable for the application of this document. For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (indudrng any amendments) applies.
ISO 240, Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandreis ISO 2780, Milling cutters with tenon dnve — Interchangeability dimensions for cutter arbors — Metnc series
ISO 2940-1. Milling cutters mounted on centring arbors having a 7/24 taper— Fitting dimensions Centring arbors
ISO 3365, Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions ISO 11529-2. Milling cutters — Designation — Part 2: Shank-type and bore-type milling cutters with indexable inserts
3 Style
Milling cutters with indexab4e inserts shall have cutting edge angles. ç. of 45. 60, 75 and 90 and the
following styles;
— style A with tenon drive and hexagon socket head cap screw;
— style B with tenon drive and cutter retaining screw with interchangeability dimensions in accordance with
ISO 2780:
style C mounted on centring arbor having a 7124 taper with interchangeability dimensions in accordance with ISO 2940-1.
NOTE 1 Cutting edge angles other than those listed In this clause ar optional as long as they fit into the designation system according to ISO 11529-2.
NOTE 2 Th abbreviated terms for the dm’iensaons are taken from ISO/IS 13399-3.
The following referenced documents are Indispensable for the application of this document. For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (indudrng any amendments) applies.
ISO 240, Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandreis ISO 2780, Milling cutters with tenon dnve — Interchangeability dimensions for cutter arbors — Metnc series
ISO 2940-1. Milling cutters mounted on centring arbors having a 7/24 taper— Fitting dimensions Centring arbors
ISO 3365, Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions ISO 11529-2. Milling cutters — Designation — Part 2: Shank-type and bore-type milling cutters with indexable inserts
3 Style
Milling cutters with indexab4e inserts shall have cutting edge angles. ç. of 45. 60, 75 and 90 and the
following styles;
— style A with tenon drive and hexagon socket head cap screw;
— style B with tenon drive and cutter retaining screw with interchangeability dimensions in accordance with
ISO 2780:
style C mounted on centring arbor having a 7124 taper with interchangeability dimensions in accordance with ISO 2940-1.
NOTE 1 Cutting edge angles other than those listed In this clause ar optional as long as they fit into the designation system according to ISO 11529-2.
NOTE 2 Th abbreviated terms for the dm’iensaons are taken from ISO/IS 13399-3.
